Catalog C00410 Page 11

1111 Lancaster Avenue
P.O. Box 990
Rosemont, PA 19010-0911, USA
phone: 610-527-1300
or 800-727-1022
fax: 610-527-4463

This specially designed point is for use in all thicknesses of Kevlar ONLY Laminates. The unusual geometry of this tool eliminates breakout and delamination of the material being drilled.

Standard Part #	Stub Part #	Size -- Range
B02150 B02155 B02160 B02165 B02170	B02005 B02010 B02015 B02020 B02025	.098 / .125 .1285 / .1562 .157 / .185 .1875 / .199 .201 / .228
B02175 B02180 B02185 B02190 B02195	B02030 B02035 B02040 B02045 B02050	.234 / .250 .257 / .272 .2756 / .282 .290 / .315 .316 / .3438
B02200 B02205 B02210 B02215	B02055 B02060 B02065 B02070	.348 / .3594 .368 / .377 .386 / .3937 .397 / .4062
B02220 B02225 B02230 B02235	B02075 B02080 B02085 B02090	.413 / .4219 .4331 / .4375 .4528 / .4724 .4844 / .500

Material Thickness	0.060	0.125	0.180	0.250 and Over
Drill Size In.	Revolutions per Minute
0.060 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.625	1350 1150 1100 1000 1000 900 900 800 800	1150 1100 1000 1000 900 900 800 600 600	1000 1000 900 900 900 900 600 600 400	1000 900 800 800 725 725 600 400 400

For drilling composites when there is a metal layer sandwiched between composite layers. This multi-angle point allows drilling both materials while lessening the break out in the composite.

8-Facet Drills
Standard Part #	Stub Part #	Size -- Range
B02650 B02655 B02660 B02665	B02505 B02510 B02515 B02520	.098 / .125 .1285 / .1562 .157 / .185 .1875 / .199
B02670 B02675 B02680 B02685	B02525 B02530 B02535 B02540	.201 / .228 .234 / .250 .257 / .272 .2756 / .282
B02690 B02695 B02700 B02705 B02710	B02545 B02550 B02555 B02560 B02565	.290 / .315 .316 / .3438 .348 / .3594 .368 / .377 .386 / .3937
B02715 B02720 B02725 B02730 B02735	B02570 B02575 B02580 B02585 B02590	.397 / .4062 .413 / .4219 .4331 / .4375 .4528 / .4724 .4844 / .500


Jo Bolt Cutters	Nut Plate Drills

Parabolic Drills	Drill Countersinks